국가별 풍하중 기준과 풍동실험에 따른 대공간 구조물 지붕의 풍압계수 분석

Translated title of the contribution: Analysis of Wind Pressure Coefficient for Spatial Structure Roofs by Wind Load Standards and Wind Tunnel Tests

Research output: Contribution to journalArticlepeer-review

Abstract

Spatial Structure has suffered from a lot of damage due to the use of lightweight roofs. Among them, the damage caused by strong winds was the greatest, and the failure of the calculation of the wind load was the most frequent cause. It provides that wind tunnel test is used to calculate the wind load. However, it is often the case that the wind load is calculated based on the standard of wind load in the development design stage. Therefore based on this, the structure type and structural system and member design are often determined. Spatial structure is usually open at a certain area. The retractable roof structure should be operated with the open roof in some cases, so the wind load for the open shape should be considered, but it is not clear on the basis of the wind load standard. In this paper, the design wind pressure of a closed and retractable roof structure is calculated by KBC2016, AIJ2004, ASCE7-10, EN2005, and the applicability of wind pressure coefficient is compared with wind tunnel test.
Translated title of the contributionAnalysis of Wind Pressure Coefficient for Spatial Structure Roofs by Wind Load Standards and Wind Tunnel Tests
Original languageKorean
Pages (from-to)103-113
Number of pages11
Journal한국공간구조학회지
Volume17
Issue number4
DOIs
StatePublished - Dec 2017

Fingerprint

Dive into the research topics of 'Analysis of Wind Pressure Coefficient for Spatial Structure Roofs by Wind Load Standards and Wind Tunnel Tests'. Together they form a unique fingerprint.

Cite this