마찰교반공정에 의한 AZ31/CNT 표면 복합재료 제조

Translated title of the contribution: Fabrication of AZ31/CNT Surface Composite by Friction Stir Processing

Research output: Contribution to journalArticlepeer-review

Abstract

Friction stir processing (FSP) was applied to fabricate AZ31/CNT (Carbon Nano Tube) surface composite for improvement of surface hardness of AZ31 Mg-based alloy. The effects of traverse speed of rotating tool and volume fraction of CNT (i.e., groove depth of 3 mm and 4 mm) on the soundness and hardness of the composite layer were investigated. Multi-walled CNTs were fully filled in a machined groove and stirring tool was rotated at the speed of 1400 rpm. Only under the tool traverse speed of 25 mm/min for the specimen with a groove depth of 3 mm, surface composite layer with no defect was successfully produced. Increased hardness of about 35% was observed in the composite layer.
Translated title of the contributionFabrication of AZ31/CNT Surface Composite by Friction Stir Processing
Original languageKorean
Pages (from-to)3115-321
Number of pages7
Journal열처리공학회지
Volume28
Issue number6
DOIs
StatePublished - Nov 2015

Fingerprint

Dive into the research topics of 'Fabrication of AZ31/CNT Surface Composite by Friction Stir Processing'. Together they form a unique fingerprint.

Cite this