Adjustment of CNC machine tool controller setting values by an experimental method

H. D. Kwon; M. Burdekin

doi:10.1016/S0890-6955(97)00058-8

Adjustment of CNC machine tool controller setting values by an experimental method

H. D. Kwon, M. Burdekin

Dept. of Manufacturing Systems and Design Engineering

University of Manchester

Research output: Contribution to journal › Article › peer-review

28 Scopus citations

Abstract

This paper presents an adjustment technique on controller setting values in CNC machine tools by measurement of servo induced feed drive errors. At high feed rate operations of CNC machine tools, servo induced errors are usually dominant and large compared with geometric errors. For measurement of the servo induced errors, an experimental equipment which incorporates two linear displacement sensors and a steel cube was developed, and servo feed drive errors were evaluated along a square corner test path. Based on evaluations of servo feed drive errors with different combination of parameters in machine control system, optimum setting parameters were found. The measuring equipment and optimisation method are described.

Original language	English
Pages (from-to)	1045-1065
Number of pages	21
Journal	International Journal of Machine Tools and Manufacture
Volume	38
Issue number	9
DOIs	https://doi.org/10.1016/S0890-6955(97)00058-8
State	Published - Sep 1998

Keywords

CNC machine tools
Servo error

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/S0890-6955(97)00058-8

Cite this

@article{44d9e66102a24700b37e238e5202d547,

title = "Adjustment of CNC machine tool controller setting values by an experimental method",

abstract = "This paper presents an adjustment technique on controller setting values in CNC machine tools by measurement of servo induced feed drive errors. At high feed rate operations of CNC machine tools, servo induced errors are usually dominant and large compared with geometric errors. For measurement of the servo induced errors, an experimental equipment which incorporates two linear displacement sensors and a steel cube was developed, and servo feed drive errors were evaluated along a square corner test path. Based on evaluations of servo feed drive errors with different combination of parameters in machine control system, optimum setting parameters were found. The measuring equipment and optimisation method are described.",

keywords = "CNC machine tools, Servo error",

author = "Kwon, \{H. D.\} and M. Burdekin",

year = "1998",

month = sep,

doi = "10.1016/S0890-6955(97)00058-8",

language = "English",

volume = "38",

pages = "1045--1065",

journal = "International Journal of Machine Tools and Manufacture",

issn = "0890-6955",

number = "9",

}

TY - JOUR

T1 - Adjustment of CNC machine tool controller setting values by an experimental method

AU - Kwon, H. D.

AU - Burdekin, M.

PY - 1998/9

Y1 - 1998/9

N2 - This paper presents an adjustment technique on controller setting values in CNC machine tools by measurement of servo induced feed drive errors. At high feed rate operations of CNC machine tools, servo induced errors are usually dominant and large compared with geometric errors. For measurement of the servo induced errors, an experimental equipment which incorporates two linear displacement sensors and a steel cube was developed, and servo feed drive errors were evaluated along a square corner test path. Based on evaluations of servo feed drive errors with different combination of parameters in machine control system, optimum setting parameters were found. The measuring equipment and optimisation method are described.

AB - This paper presents an adjustment technique on controller setting values in CNC machine tools by measurement of servo induced feed drive errors. At high feed rate operations of CNC machine tools, servo induced errors are usually dominant and large compared with geometric errors. For measurement of the servo induced errors, an experimental equipment which incorporates two linear displacement sensors and a steel cube was developed, and servo feed drive errors were evaluated along a square corner test path. Based on evaluations of servo feed drive errors with different combination of parameters in machine control system, optimum setting parameters were found. The measuring equipment and optimisation method are described.

KW - CNC machine tools

KW - Servo error

UR - http://www.scopus.com/inward/record.url?scp=0032164612&partnerID=8YFLogxK

U2 - 10.1016/S0890-6955(97)00058-8

DO - 10.1016/S0890-6955(97)00058-8

M3 - Article

AN - SCOPUS:0032164612

SN - 0890-6955

VL - 38

SP - 1045

EP - 1065

JO - International Journal of Machine Tools and Manufacture

JF - International Journal of Machine Tools and Manufacture

IS - 9

ER -

Adjustment of CNC machine tool controller setting values by an experimental method

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this