Comparison of electrical properties between sputter deposited Au and Cu Schottky contacts to n-type Ge

Hogyoung Kim, Min Kyung Kim, Yeon Jin Kim

Research output: Contribution to journalArticlepeer-review

Abstract

Using current-voltage (I-V) and capacitance-voltage (C-V) measurements, the electrical properties of Au and Cu Schottky contacts to n-Ge were comparatively investigated. Lower values of barrier height, ideality factor and series resistance were obtained for the Au contact as compared to the Cu contact. The values of capacitance showed strong dependence on the bias voltage and the frequency. The presence of an inversion layer at the interface might reduce the intercept voltage at the voltage axis, lowering the barrier height for C-V measurements, especially at lower frequencies. In addition, a higher interface state density was observed for the Au contact. The generation of sputter deposition-induced defects might occur more severely for the Au contact; these defects affected both the I-V and C-V characteristics.

Original languageEnglish
Pages (from-to)556-560
Number of pages5
JournalKorean Journal of Materials Research
Volume26
Issue number10
DOIs
StatePublished - 2016

Keywords

  • Barrier height
  • Interface state
  • Series resistance

Fingerprint

Dive into the research topics of 'Comparison of electrical properties between sputter deposited Au and Cu Schottky contacts to n-type Ge'. Together they form a unique fingerprint.

Cite this