Formulation and properties of model beverage emulsions stabilized by sucrose monopalmitate: Influence of pH and lyso-lecithin addition

There is a growing trend toward utilizing more label friendly ingredients in foods and beverages. In this study, we focused on the utilization of sucrose monopalmitate (SMP) as a non-ionic surfactant for stabilizing acidic beverages. Orange oil-in-water emulsions (5% (w/w) oil) stabilized by SMP were prepared using high pressure homogenization (pH 7). The minimum droplet diameter was around 130nm, while the minimum mass ratio of SMP-to-oil required to produce small droplets was 0.1-to-1. Extensive droplet aggregation occurred when the pH of the emulsions was reduced from pH 7 to 3, with the mean particle diameter increasing from around 0.13 to 7.25μm. This effect was attributed to an appreciable reduction in droplet charge when the pH was reduced (ζ≈-35mV at pH 3 and -2mV at pH 3) thereby decreasing the electrostatic repulsion between droplets. It was proposed that the negative charge on the SMP-coated droplets was due to the presence of anionic substances within the droplets, such as palmitic acid (pK_a≈4.9). Palmitic acid may have been an impurity in the original ingredient or it may have been generated due to degradation of SMP during storage. The addition of anionic lyso-lecithin markedly improved the stability of the emulsions to droplet aggregation and phase separation at low pH, which was attributed to an increased electrostatic repulsion between the droplets. This study has important consequences for the formulation of acidic beverage emulsions with improved stability and physicochemical performance.