Abstract
Short-wave infrared (SWIR) hyperspectral line-scan systems frequently operate in a shot-noise-limited regime because dark current increases significantly at longer wavelengths. In this regime, the signal uncertainty is fundamentally determined by the equivalent noise bandwidth (ENBW) of the acquisition chain rather than by offset calibration alone. Conventional capacitive transimpedance amplifier (CTIA)-based readout schemes implicitly fix the measurement bandwidth through the integration window, causing stochastic current fluctuations to accumulate without spectral control. This article proposes a front-end measurement-bandwidth engineering method that explicitly controls ENBW prior to stochastic charge accumulation. By reshaping the input-current spectrum before integration, the proposed method reduces shot-noise variance without increasing integration capacitance or altering pixel geometry. A 64 × 1 SWIR line-scan prototype validates the theoretical ENBW-noise relationship under identical optical and electrical conditions. Experimental results show that the measured shot-noise reduction follows the ENBW scaling introduced by the adaptive front-end network, improving signal-to-noise ratio (SNR) from 68.1 to 73.2 dB under noncooled operation up to ∼2.6μ m.
| Original language | English |
|---|---|
| Article number | 9530310 |
| Journal | IEEE Transactions on Instrumentation and Measurement |
| Volume | 75 |
| DOIs | |
| State | Published - 2026 |
Keywords
- Equivalent noise bandwidth (ENBW)
- hyperspectral instrumentation
- measurement bandwidth
- short-wave infrared (SWIR) line-scan systems
- shot-noise-limited measurement
Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver