Synthesis and electrical property of indium tin oxide nanofibers using electrospinning method

Young In Lee; Kun Jae Lee; Ki Do Kim; Hee Taik Kim; Young Wook Chang; Shin Choon Kang; Yong Ho Choa

doi:10.1166/jnn.2007.048

Synthesis and electrical property of indium tin oxide nanofibers using electrospinning method

Young In Lee, Kun Jae Lee, Ki Do Kim, Hee Taik Kim, Young Wook Chang, Shin Choon Kang, Yong Ho Choa

Dept. of Materials Science & Engineering

Hanyang University

Research output: Contribution to journal › Article › peer-review

14 Scopus citations

Abstract

In this study indium tin oxide (ITO) nanofibers were synthesized using an electrospinning method. The morphological properties of the ITO nanofibers were considered and their specific resistances were measured to determine their applicability as filler for a transparent conducting film. ITO/PVP composite nanofibers were successfully obtained by electrospinning using a precursor solution containing indium nitrate, tin chloride, and poly(vinlypyrrolidone). After the heat treatment of ITO/PVP composite nanofibers at 600 °C and 1000 °C, ITO nanofibers with an average diameter of about 168 nm and 165 nm were synthesized, respectively.

Original language	English
Pages (from-to)	3910-3913
Number of pages	4
Journal	Journal of Nanoscience and Nanotechnology
Volume	7
Issue number	11
DOIs	https://doi.org/10.1166/jnn.2007.048
State	Published - Nov 2007

Keywords

Electrical property
Electrospinning
Indium tin oxide
Nanofibers

Access to Document

10.1166/jnn.2007.048

Cite this

@article{666a0aca0fd1468fa69d595e079cc87f,

title = "Synthesis and electrical property of indium tin oxide nanofibers using electrospinning method",

abstract = "In this study indium tin oxide (ITO) nanofibers were synthesized using an electrospinning method. The morphological properties of the ITO nanofibers were considered and their specific resistances were measured to determine their applicability as filler for a transparent conducting film. ITO/PVP composite nanofibers were successfully obtained by electrospinning using a precursor solution containing indium nitrate, tin chloride, and poly(vinlypyrrolidone). After the heat treatment of ITO/PVP composite nanofibers at 600 °C and 1000 °C, ITO nanofibers with an average diameter of about 168 nm and 165 nm were synthesized, respectively.",

keywords = "Electrical property, Electrospinning, Indium tin oxide, Nanofibers",

author = "Lee, \{Young In\} and Lee, \{Kun Jae\} and Kim, \{Ki Do\} and Kim, \{Hee Taik\} and Chang, \{Young Wook\} and Kang, \{Shin Choon\} and Choa, \{Yong Ho\}",

year = "2007",

month = nov,

doi = "10.1166/jnn.2007.048",

language = "English",

volume = "7",

pages = "3910--3913",

journal = "Journal of Nanoscience and Nanotechnology",

issn = "1533-4880",

publisher = "ASP",

number = "11",

}

TY - JOUR

T1 - Synthesis and electrical property of indium tin oxide nanofibers using electrospinning method

AU - Lee, Young In

AU - Lee, Kun Jae

AU - Kim, Ki Do

AU - Kim, Hee Taik

AU - Chang, Young Wook

AU - Kang, Shin Choon

AU - Choa, Yong Ho

PY - 2007/11

Y1 - 2007/11

N2 - In this study indium tin oxide (ITO) nanofibers were synthesized using an electrospinning method. The morphological properties of the ITO nanofibers were considered and their specific resistances were measured to determine their applicability as filler for a transparent conducting film. ITO/PVP composite nanofibers were successfully obtained by electrospinning using a precursor solution containing indium nitrate, tin chloride, and poly(vinlypyrrolidone). After the heat treatment of ITO/PVP composite nanofibers at 600 °C and 1000 °C, ITO nanofibers with an average diameter of about 168 nm and 165 nm were synthesized, respectively.

AB - In this study indium tin oxide (ITO) nanofibers were synthesized using an electrospinning method. The morphological properties of the ITO nanofibers were considered and their specific resistances were measured to determine their applicability as filler for a transparent conducting film. ITO/PVP composite nanofibers were successfully obtained by electrospinning using a precursor solution containing indium nitrate, tin chloride, and poly(vinlypyrrolidone). After the heat treatment of ITO/PVP composite nanofibers at 600 °C and 1000 °C, ITO nanofibers with an average diameter of about 168 nm and 165 nm were synthesized, respectively.

KW - Electrical property

KW - Electrospinning

KW - Indium tin oxide

KW - Nanofibers

UR - https://www.scopus.com/pages/publications/38449083721

U2 - 10.1166/jnn.2007.048

DO - 10.1166/jnn.2007.048

M3 - Article

C2 - 18047086

AN - SCOPUS:38449083721

SN - 1533-4880

VL - 7

SP - 3910

EP - 3913

JO - Journal of Nanoscience and Nanotechnology

JF - Journal of Nanoscience and Nanotechnology

IS - 11

ER -

Synthesis and electrical property of indium tin oxide nanofibers using electrospinning method

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this