Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction

Hyunseob Kim; Jungho Han; Young Il Lee; Joong Ho Song; Kyo Beum Lee

doi:10.1109/ISIE.2013.6563664

Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction

Hyunseob Kim
, Jungho Han
, Young Il Lee
, Joong Ho Song
, Kyo Beum Lee

Dept. of Electrical and Information Engineering

Seoul National University of Science and Technology (SNUST)
Ajou University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

7 Scopus citations

Abstract

In this paper, a torque ripple reduction method is presented for PMSM controlled by the torque predictive control. The proposed method, which predicts the duty ratio of the active stator voltage applied, makes it possible to relatively reduce the torque ripple in the steady state as well as to remain the good dynamic response in the transient state. With the duty ratio prediction method, the magnitude and time interval of the active stator voltage vector applied can be continuously controlled under the varying operation conditions. Simulation results show validity and effectiveness of this work.

Original language	English
Title of host publication	2013 IEEE International Symposium on Industrial Electronics, ISIE 2013
DOIs	https://doi.org/10.1109/ISIE.2013.6563664
State	Published - 2013
Event	2013 IEEE 22nd International Symposium on Industrial Electronics, ISIE 2013 - Taipei, Taiwan, Province of China Duration: 28 May 2013 → 31 May 2013

Publication series

Name	IEEE International Symposium on Industrial Electronics

Conference

Conference	2013 IEEE 22nd International Symposium on Industrial Electronics, ISIE 2013
Country/Territory	Taiwan, Province of China
City	Taipei
Period	28/05/13 → 31/05/13

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

duty ratio prediction
Permanent magnet synchronous motor(PMSM)
torque predictive control(TPC)
torque ripple reduction

Access to Document

10.1109/ISIE.2013.6563664

Cite this

@inproceedings{a2b26f3326fd4f4a80569c80bd80d3f9,

title = "Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction",

abstract = "In this paper, a torque ripple reduction method is presented for PMSM controlled by the torque predictive control. The proposed method, which predicts the duty ratio of the active stator voltage applied, makes it possible to relatively reduce the torque ripple in the steady state as well as to remain the good dynamic response in the transient state. With the duty ratio prediction method, the magnitude and time interval of the active stator voltage vector applied can be continuously controlled under the varying operation conditions. Simulation results show validity and effectiveness of this work.",

keywords = "duty ratio prediction, Permanent magnet synchronous motor(PMSM), torque predictive control(TPC), torque ripple reduction",

author = "Hyunseob Kim and Jungho Han and Lee, \{Young Il\} and Song, \{Joong Ho\} and Lee, \{Kyo Beum\}",

year = "2013",

doi = "10.1109/ISIE.2013.6563664",

language = "English",

isbn = "9781467351942",

series = "IEEE International Symposium on Industrial Electronics",

booktitle = "2013 IEEE International Symposium on Industrial Electronics, ISIE 2013",

note = "2013 IEEE 22nd International Symposium on Industrial Electronics, ISIE 2013 ; Conference date: 28-05-2013 Through 31-05-2013",

}

Kim, H, Han, J, Lee, YI, Song, JH & Lee, KB 2013, Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction. in 2013 IEEE International Symposium on Industrial Electronics, ISIE 2013., 6563664, IEEE International Symposium on Industrial Electronics, 2013 IEEE 22nd International Symposium on Industrial Electronics, ISIE 2013, Taipei, Taiwan, Province of China, 28/05/13. https://doi.org/10.1109/ISIE.2013.6563664

Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction. / Kim, Hyunseob; Han, Jungho; Lee, Young Il et al.
2013 IEEE International Symposium on Industrial Electronics, ISIE 2013. 2013. 6563664 (IEEE International Symposium on Industrial Electronics).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction

AU - Kim, Hyunseob

AU - Han, Jungho

AU - Lee, Young Il

AU - Song, Joong Ho

AU - Lee, Kyo Beum

PY - 2013

Y1 - 2013

N2 - In this paper, a torque ripple reduction method is presented for PMSM controlled by the torque predictive control. The proposed method, which predicts the duty ratio of the active stator voltage applied, makes it possible to relatively reduce the torque ripple in the steady state as well as to remain the good dynamic response in the transient state. With the duty ratio prediction method, the magnitude and time interval of the active stator voltage vector applied can be continuously controlled under the varying operation conditions. Simulation results show validity and effectiveness of this work.

AB - In this paper, a torque ripple reduction method is presented for PMSM controlled by the torque predictive control. The proposed method, which predicts the duty ratio of the active stator voltage applied, makes it possible to relatively reduce the torque ripple in the steady state as well as to remain the good dynamic response in the transient state. With the duty ratio prediction method, the magnitude and time interval of the active stator voltage vector applied can be continuously controlled under the varying operation conditions. Simulation results show validity and effectiveness of this work.

KW - duty ratio prediction

KW - Permanent magnet synchronous motor(PMSM)

KW - torque predictive control(TPC)

KW - torque ripple reduction

UR - https://www.scopus.com/pages/publications/84881631211

U2 - 10.1109/ISIE.2013.6563664

DO - 10.1109/ISIE.2013.6563664

M3 - Conference contribution

AN - SCOPUS:84881631211

SN - 9781467351942

T3 - IEEE International Symposium on Industrial Electronics

BT - 2013 IEEE International Symposium on Industrial Electronics, ISIE 2013

T2 - 2013 IEEE 22nd International Symposium on Industrial Electronics, ISIE 2013

Y2 - 28 May 2013 through 31 May 2013

ER -

Torque predictive control of permanent-magnet synchronous motor using duty ratio prediction

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this